XL1050 2 Channel Power Amplifier with Bridge Mono Power for Outdoor Performances
Description
1,Output Connectivity: Output connectivity options include binding posts or terminal blocks. The choice of connector depends on the type of speakers being used and the wiring configuration required.
,2,Cooling and Protection: Stage power amplifiers generate heat during operation, so they incorporate cooling mechanisms such as fans and heatsinks to dissipate heat and prevent overheating. It's important to ensure proper ventilation and airflow around the amplifier to maintain optimal operating temperatures. Additionally, protection features like short circuit protection, thermal overload protection, and DC offset protection help safeguard the amplifier and connected equipment.
Quick Detail
| Model | XL-1050 |
输出功率 TA 1KHz THD≤1%立体声
Stereo Power | 8 OHMS | 2×1050W |
| 4 OHMS | 2×1500W |
输出功率 TA 1KHz THD≤1%桥接
Bridge Mono Power | 8 OHMS | 3000W |
频率响应
Frequency Response | 10Hz-50KHz-1.5dB |
信噪比(1KHz,0.775V,A计权)
Noise A-weighting | ＞100dB |
阻尼系数(f=1KHz,8 OHMS)
Damping Coefficient | ＞200 |
最大输入电平
Maximum Input Level | 21dBV/9V |
转换速率
Slew Rate | ≥35V/μS |
声道分离度
Channel Separation | ＞70dB |
输入灵敏度
Input Sensitivity | 0.77V/1V/1.4V |
输入阻抗(平衡/不平衡)
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS |
输出类别
Output Type | Class A |
功耗(半功率,8 OHMS)
Power Dissipation (half-power,8 OHMS) | ＜1200W |
电源
Power Source | 220V-240V/50Hz |
冷却
Cooling | 无级变速风扇
Two variable speed fans |
保护功能
Protection | 直流/短路/过压过流保护/软启动/功放管过热保护/失真限幅
DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting |
显示
Display | 电源灯(绿),保护灯(红),过载灯(黄),信号灯(绿)
Power light (green), Protection light (red), Overload light (yellow), Signal light (green) |
输入
Input | 卡侬平衡输入
Balanced input |
输出
Output | 专业接线柱输出
Professioanl binding post outputs |
前板控制
Panel Control | 左右通道音量控制,电源开关控制
Left and right channel volume control, power switch control |
背板控制
Backplane Control | 立体声/桥接/并联单声道转换开关,灵敏度0.77V/1V/1.4V转换开关 Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch |
产品外形尺寸(毫米)
Dimension (mm) | 482×429.5×88(mm) |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Product Tags:
|
|
XL1050 2 Channel Power Amplifier Class A With Bridge Mono Power Images
|
